HDPE ducts and microducts - SPUR https://www.spur.cz/en/ Mon, 01 Jun 2026 08:03:39 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 SPUR OPTIX® microducts https://www.spur.cz/en/produkt/hdpe-microducts/ Sat, 04 Dec 2021 18:14:57 +0000 https://www.spur.cz/produkt/hdpe-mikrotrubicky/

The most common method of fiber optical cable installing is using of the built ducts infrastructure. The most economically advantageous and increasingly popular method is the system of single thick- or thin-walled microducts or their bundles. This variant uses compressed air for installing optical fibers or micro-cables into existing ducts network on customer’s request.

QUICK CONTACT LEAFLET

HDPE microducts are offered in following types:

 

DI (Direct Install) -instalation into ducts

SIZE: 7/5,5; 10/8; 12/10 mm

DB (Direct Buried) – instalation directly in the ground

SIZE: 7/3,5; 7/4; 10/6; 12/8; 14/10; 16/12 mm

PROPERTIES

| solid and permanent lubrication made by co-extrusion reducing friction between microcables and microducts
| smooth or grooved inner wall
| a wide range of colours including longitudinal identification strips
| made only from the virgin HDPE

ACCESSORIES

couplings, adapters, plugs, bushings

The post SPUR OPTIX® microducts first appeared on SPUR.

]]> SPUR OPTIX® cable ducts https://www.spur.cz/en/produkt/hdpe-cable-ducts/ Sat, 04 Dec 2021 18:13:47 +0000 https://www.spur.cz/produkt/hdpe-kabelove-chranicky/

The most common method of fiber optical cable installing is using of the built ducts infrastructure. The most economically advantageous and increasingly popular method is the system of single thick- or thin-walled microducts or their bundles. This variant uses compressed air for installing optical fibers or micro-cables into existing ducts network on customer’s request.

QUICK CONTACT LEAFLET

PARAMETERS

OUTER DIAMETER: 20 – 50 mm
INSIDE DIAMETER: 15,4 – 42 mm
WALL THICKNESS: 2,3 – 4 mm
WEIHGT: 122 – 552 g/m
LENGTH ON A DRUM: 1 100 – 7 800 m
COIL LENGTH: 300 – 2 000 m

HDPE microducts are offered in following types:

 

ADVANTAGES

| increased efficiency in network building
| ease of connecting the ducts with the aid of couplings
| a print indicating length of cables gives information about the length of the cable installed
| possibility of using ducts of different colour allows to distinguish cables when several cables are installed in a single trench
| strength imparting the duct compression resistance
| heat resistance providing satisfactory mechanical properties in the temperature range from -20 to +55 °C
long durability
| resistance to moisture, oil, petrol, rodents and other unfavourable factors that may affect the duct underground

The post SPUR OPTIX® cable ducts first appeared on SPUR.

]]> SPUR OPTIX® multiducts https://www.spur.cz/en/produkt/multiducts/ Sat, 04 Dec 2021 18:16:12 +0000 https://www.spur.cz/produkt/multi-svazky-mikrotrubicek/

The most common method of fiber optical cable installing is using of the built ducts infrastructure. The most economically advantageous and increasingly popular method is the system of single thick- or thin-walled microducts or their bundles. This variant uses compressed air for installing optical fibers or micro-cables into existing ducts network on customer’s request.

QUICK CONTACT LEAFLET

HDPE microducts are offered in following types:

 

ADVANTAGES

| increased efficiency in network building
| ease of connecting the ducts with the aid of couplings
| a print indicating length of cables gives information about the length of the cable installed
| possibility of using ducts of different colour allows to distinguish cables when several cables are installed in a single trench
| strength imparting the duct compression resistance
| heat resistance providing satisfactory mechanical properties in the temperature range from -20 to +55 °C
long durability
| resistance to moisture, oil, petrol, rodents and other unfavourable factors that may affect the duct underground

The post SPUR OPTIX® multiducts first appeared on SPUR.

]]> COVERX cover plates https://www.spur.cz/en/produkt/coverx-cover-plates/ Mon, 17 Jul 2023 17:08:11 +0000 https://www.spur.cz/?post_type=produkt&p=6694

The most common method of fiber optical cable installing is using of the built ducts infrastructure. The most economically advantageous and increasingly popular method is the system of single thick- or thin-walled microducts or their bundles. This variant uses compressed air for installing optical fibers or micro-cables into existing ducts network on customer’s request.

QUICK CONTACT LEAFLET

TECHNICAL SPECIFICATIONS

PLATE WIDTH: 250 mm / 120 mm
PLATE THICKNESS: 2 mm
PLATE LENGTH: 1000 mm
COIL LENGTH: 25 – 50 m

BASIC CHARACTERISTICS

| continuous and fully identifiable cable protection
| easy laying
| usability in extremely low temperatures
| made from 100% recycled material
| environmentally friendly
| long service life
| full recyclability

We produce cover plates in various color variants with the desired print. To cover straight routes without curves, they are available in coils, which enable faster and more efficient installation.

Each cover plate and disk is equipped with a lock for a firm longitudinal connection. This connection makes it possible to cover even slight turns. The lock is designed to withstand the harsh environment of the excavation and not to disconnect during handling.

The post COVERX cover plates first appeared on SPUR.

]]> Couplings and endcaps https://www.spur.cz/en/produkt/couplings-and-endcaps/ Sat, 04 Dec 2021 18:17:16 +0000 https://www.spur.cz/produkt/spojky-koncovky-a-pruchodky/

The most common method of fiber optical cable installing is using of the built ducts infrastructure. The most economically advantageous and increasingly popular method is the system of single thick- or thin-walled microducts or their bundles. This variant uses compressed air for installing optical fibers or micro-cables into existing ducts network on customer’s request.

QUICK CONTACT LEAFLET

HDPE microducts are offered in following types:

 

ADVANTAGES

| increased efficiency in network building
| ease of connecting the ducts with the aid of couplings
| a print indicating length of cables gives information about the length of the cable installed
| possibility of using ducts of different colour allows to distinguish cables when several cables are installed in a single trench
| strength imparting the duct compression resistance
| heat resistance providing satisfactory mechanical properties in the temperature range from -20 to +55 °C
long durability
| resistance to moisture, oil, petrol, rodents and other unfavourable factors that may affect the duct underground

PROPERTIES

| solid and permanent lubrication made by co-extrusion reducing friction between microcables and microducts
| smooth or grooved inner wall
| a wide range of colours including longitudinal identification strips
| made only from the virgin HDPE

ACCESSORIES

couplings, adapters, plugs, bushings

The post Couplings and endcaps first appeared on SPUR.

]]> Accessories https://www.spur.cz/en/produkt/accessories/ Sat, 04 Dec 2021 18:18:13 +0000 https://www.spur.cz/produkt/ostatni-material/

The most common method of fiber optical cable installing is using of the built ducts infrastructure. The most economically advantageous and increasingly popular method is the system of single thick- or thin-walled microducts or their bundles. This variant uses compressed air for installing optical fibers or micro-cables into existing ducts network on customer’s request.

QUICK CONTACT LEAFLET

Electronic marking system

The electronic marking system is intended for an easy searching of underground installations e.g. cable routes, optical routs, crossing cable routs, underground jointing, couplings etc.
The basic element of this system is a permanent passive mark (a marker), which is buried in the ground over the installation during its construction. The location of the marker can also be easily found after a few years by the a compact electronic detector. The markers are differentiated by searching frequencies and colours for each type of the underground installation. The orange markers are used for telecommunication (according to APWA).

HDPE microducts are offered in following types:

 

ADVANTAGES

| increased efficiency in network building
| ease of connecting the ducts with the aid of couplings
| a print indicating length of cables gives information about the length of the cable installed
| possibility of using ducts of different colour allows to distinguish cables when several cables are installed in a single trench
| strength imparting the duct compression resistance
| heat resistance providing satisfactory mechanical properties in the temperature range from -20 to +55 °C
long durability
| resistance to moisture, oil, petrol, rodents and other unfavourable factors that may affect the duct underground

The post Accessories first appeared on SPUR.

]]>